Pelican Radio Control Hobbies

Your online source for the latest in Electric and Petrol Powered Radio Control Model Aircraft, plus RC Engines, Electric Motors, Batteries and RC Accessories.

RC Products

  • 5m Covering Film Various colours

    Description: Item Name: Heat shrink film Length: 5m Width: 64cm Thickness: 0.05mm Color: Red Feature: ·Super strong with a tensile strength of around 25,000 psi (pounds per square inch) ·Lightweight about 100g/m² ·Dry adhesive is activated when heat Is applied ·Shrinks to a drum-tight finish as it cools ·Molds crease-free around compound curves and into corners ·High gloss finish, waterproof, fuel-proof (Glow Fuel, Gasoline, Smoke) ·Strong adhesion. How to Use: Please be sure to test a sample first as your iron heat settings may vary and practice on some scrap material first. Remove the protective backing film,put the film on top of framework to be covered,heating at the frame with … More..

  • 600TVL 1/4 1.8mm CMOS FPV 170 Degree Wide Angle Lens Camera PAL/NTSC 3.7

    Description: Resolution: 1280 * 960 Resolution: 600TVL Camera Dimensions: 12.5mm * 12.5mm * 17mm Illumination: 0.5LUX Format:PAL / NTSC Power supply range: 3.7-5V 100mA Audio Lens: Wide-angle 1.8mm (170 degree) Image sensor:1/4 CMOS image sensor Sensitive area: 3.5964mm x 2.7084mm 648 pixels (horizontal) × 488 (vertical) 648 (horizontal) × 488 (vertical) Scanning Frequency Horizontal: 15.625KHz Vertical: 50Hz level: 15.7343KHz Vertical: 60Hz Electronic Shutter 1 / 50-1 / 80000 (sec) 1 / 60-1 / 80000 (sec) SNR ≥48dB (AGC OFF) Minimum illumination : 0.1 Lux / F1.2 Composite video signal :1.0Vp-p 75Ω Standard Lens :1.8 mm Specifications PCB: 20mm*20mm Power: DC5V ± 10% 70mA ± 10% Operating temperature :-10 ℃ ~ … More..

  • Big Stick 1060mm Wingspan Laser Cut Balsa Kit With Landing Gear And Wheels

      The Stick design seems like it has been around for as long as the hills but this new take on this classic is a bit special. all laser cut and ready for Electric or Glow (but electric is awesome), this semi advanced trainer / sports plane will has great handling for all experiences. Easy build from Laser Cut parts, and provided with accessories to suit this model builds quickly and results in a lovely finished model.   Description: Item Name: Stick Laser Cut Balsa Kit Wingspan: 1060mm Length: 780mm Kit Weight: 310g Package Weight: About 800g Product Size: 810x150x60mm Required Parts (Not Included): Radio: 4 Channel system Motor: 2826 … More..

  • Black Flyer V1 2.4G 6CH Carbon Fiber Film RC Airplane DSM2 BNF

    Well this one is a little different. Yes it is a kit but it falls in BNF too with the inclusive flight kit. Indoors or outdoors on very very calm days this lovely little model is DSM ready, includes all the flight gear including the motor and battery. Description: Brand Name: TY Model Item Name: Black Flyer V1 Total Length:340mm Wingspan: 336mm Color:Black Experience Level: Beginner to advanced Radio Control: 2.4GHz 3-channel/6-channel Height:102mm Battery:14x20x6mm 100mAh 1S 3.7V Control distance:Over 100 meters Fuel Type: Electric Flying Weight: 13-18g Flight time: 10 mins Material: Carbon Fiber-abs Engineering Plastics Battery: 50-150mA1S Motor: 6mm Coreless DC CG: Behind the wing leading edge 33-35 mm … More..

  • Carbon Undercarriage 26cc / 50cc

    Perfect as a replacement undercarriage for 26cc and 50cc aircraft. Supplied with a high quality finish to the leg and undrilled.   26cc A: 120 B: 403 C: 165 D: 35 50cc A: 195 B: 495 C: 239 D: 40                  

  • CRRC GP36R 36cc Rear Exhaust RC Gas engine

    CRRCpro GP36R RC model airplane 36cc two stroke single cylinder gasoline engine with vacuum pump dual pin walbro carburetor and CDI battery ignition. 36CC displacement provides even more power, suitable for 18*10 ~ 20*8 two blades propellers and perfect for the current crop of 30cc Sports aerobatics. Specifications: Type 2 Cycle Gasoline Engine for airplane use only Displacement (cc) 36 cc Bore 1.52in (38.5mm) Stroke 1.18in (31mm) Total Weight 1300g (Include Ignition and muffler) Carburetor Walbro (Diaphragm & Butterfly Valve) Maximum Output 4.2HP @ 8700 RPM Typical RPM Range 1600RPM ~8700RPM Ignition Auto advanced DC-CDI Ignition Power DC4.8V-8.4V NiMH, LiPo or LiFe pack Gasoline/Oil Mix 25~40:1 Recommended Propellers 18×10, 19×8, 20×8 ,20×10 … More..

  • De Havilland DH82a Tiger Moth Biplane 1400mm Wingspan Laser Cut Balsa Kit

    There are a few aircraft in the history of powered flight that truly deserve to be called “classic” and the DH 82a Tiger Moth is certainly one of these, with over 8,800 being produced and around still 500 being flown today. The prototype DH82 first flew in 1931, having been developed from the earlier DH60 “Gypsy Moth” by changing to an inverted engine to allow a better forward view and incorporating the distinctive swept wings to enable easier escape by parachute from the forward cockpit at the request of the Royal Air Force, who were to use the Tiger Moth as a basic trainer throughout WW2 and retired it from … More..

  • Extra 330 RC Kit model 1025mm Electric Power

    Many will have seen the Extra 330 at air displays, air races and at many other locations, it is a popular aircraft in full size aerobatics as it is one of the standards in full size. You will also often see the Extra 330 at the model field as they are probably as popular there as they are with the full size guys. This Kit RC Extra 330 builds quickly and easily into a lovely looking RC model, powered with simple RC gear, 4 mini servos, a 2216 motor, 20A esc and 3s batteries are readily available so not only do you save plenty on the airframe through building the model … More..

  • FPV 2 Axis Brushless Gimbal With Controller For DJI Phantom and other Quadcopters for GoPro 3

    Description: Item Name: Brushless camera gimbal Axis: 2 axis gyro Flight controller: BGC Weight: about 230g Compatible camera: Gopro hero camera( not included) Features: Simple structure and light weight CNC aluminum alloy structure Compatible with Gopro 3 camera 2208 motors included for direct drive With motor protector which can help heat dissipation With anti-vibration rubber balls,easy to adjust Color of the rubber balls might vary For English Manual And Instruction,The gopro3 gimbal Package included: 1 x camera gimbal 1 x controller 2 x motor   Customer supplied (not included) Camera

  • Kuza Wingbags

    Kuza Wingbags are suitable for your RC Models up to 210cc size aircraft. These are high quality bags designed for the job and made from top quality materials Main wings fit inside the two central pockets, there are also pockets on each side for tailplanes etc and a wing joiner tube holder. All rather well thought out and extremely well packaged to protect your expensive model. One bag holds 2 x wing panels – separately from each other, has space for tailplanes and Joiner tube. Kuza Wingbags available sizes – Dimension (in cm) Size Root Chord Tip Chord Span Thickness (Total) 26-35cc 60 27 90 15 40-60cc 70 32 110 … More..

  • MG90S Toward Pro (Tower Pro) Metal Gear Micro servo – 4 pack

        Description: Brand name: Towerpro Item Name: MG90S  servo Weight: about 13.4g Dimension: 22.8 x 12.2 x 28.5mm Stall Torque: 1.8kg/cm(4.8V ),2.2kg/cm(6V) Operating Speed: 0.1sec/60degree(4.8v), 0.08sec/60degree(6v) Operating Voltage: 4.8-6.0V Motor Type: coreless motor Gear Type: all metal gear Connector Wire Length : 175mm Features: Micro size Great for truck, Boat, Racing Car, Helicopter and Airplane Package Included: 4 x MG90S servo 4 x servo parts

  • Mobius New Version Wide Angle Lens C2 1080P HD Mini Action Camera

    Description: 1080P HD Video & Audio Recording HFOV : 131 deg. FOV :  1080p_5-30fps wide; 720p_5-30fps wide; WVGA_5-30fps wide Resolution : 2304×1536,1920×1080, 1280×720 TV Display Ratio : 4:3 or 16:9 Movie Flip : 180 deg. rotation Movie Sound : off plus three volume levels Max SD Card:  32 GB SD Card (not included) Can be used as a Dash Camera (Start / Stop Recording) Using Time: more than 80min Dimension:  5  x 2.5 x 2.5 cm Weight : 37g Features: Loop recording (5 min. clips with one sec. video overlap, so no lost video). Pressing the mode button while in Loop Record mode will make the current clip being recorded … More..

  • Skyartec Wasp Nano AutoCP

    Skyartec helicopters have become renowned for their great flight characteristics and fantastic value.  When Skyartec released the all new Wasp Nano their previous efforts were surpassed and this superb heli became very popular. Further improvements have taken this to have 3GX three axis rate sensor and three axis gyro capability which make it superb for people learning to fly helicopers.  Well Skyartec have gone and taken it a stage further again with the Auto3d – Auto Invert model. Simply flick a switch and the helicopter will flip itself upside down and off you go ready for inverted flight. – amazing.   Watch on our Youtube Channel Of course with Skyartec … More..

  • Slick 540 Carbon Edition. New In.

    New 74″ Slick 540.   Specification:   Wing Span:  1880mm/74in Length:  1770mm/69.5in Wing Area:  55.6sq.dm Engine:  30CC Fly Weight:  around 4500g Center-of-Gravity Location:  150mm Equipped Fuel Tank:  380ml/380cc   Features: Light Weight construction Latest structure High structural strength Two pieces of removable wings Super quality Excellent aerobatics and 3D performance Easy installation Fully symmetrical aerofoil tail wing Complete accessories High performance hardware including: Ball linkage control system; PU wheels; C.F. WingTube; Carbon Landing gear   Professional designed for 3D and precision aerobatics Cowl with cowl ring No exterior screws exposed Removable wings Pre mounted and painted Canopy Package Details: Carbon Fiber wing tube Carbon Fiber tail wing tube Carbon Fiber … More..

  • Space Walker 1230mm Wingspan Gas Electric Dual Power Balsa Wood Airplane KIT

    Description: Item Name: Space Walker balsa wood airplane Wingspan: 1230mm Length: 1140mm Flying Weight: EP 900-1000g, GP 1200-1300g Airplane Weight: About 1100g Experience Level: Intermediate Minimum Age Recommendation: 14+ Recommended Environment: Outdoor Recommend Parts (Not included): Electric Motor: 2216 1400KV, Gas Engine: 25-32 Methanol Engine ESC: 40A, Propeller: 10*6-11*4, Servo: 17g*4 (standard), Battery: 3S 2200-2600 mAh, Radio System: ≥4CH, Space Walker Installation Instruction space walker manual Package Included: 1x Space Walker 1230mm Wingspan KIT  

  • WM 37.5in Edge 540 EPP foam Brushless Airplane

    This superb 3d Edge 540 model from WM Aerobatic is brushless and lipo powered and has a carbon and plywood reinforced fuselage. Full specification and videos below Specification: — Wing span: 37.5in/955mm — Length: 37.2in/945mm — Weight: 510g(battery not included) Equipment required: — Motor: 250-300W, 70-80g, 2834-2838, 2215-2217, brushlest outrunner — ESC: 25-30A — Servo: 9-14g, 1.5-2kg/cm, plastic or metal gear — Battery: 3S 1300-1500mah — Prop: 10*4.7, 11*4.7 Recommended setup: — Motor: Dualsky XM2834CA-9/980KV — ESC: Hobbywing Flyfun 30A — Prop: APC 10*4.7SF — Servo: Towerpro MG90S — Battery: Fullymax 3S 1300mah 25C  


  • MG996 Digital Metal gear ball raced servo $6.99

    Due to a special deal we have obtained, the MG996R is available for $6.99!! Get these while we have them the MG996R is our preferred servo for models from 40 size upwards and make for great rudder servos, holding on in knife edge when much more expensive servos have given up. With its updated motherboard and processor chip this already great servo is now even more accurate. Metal gears throughout also provide better centering and deadband results. Utilising the recomended mix of brass and steel gears to minimise wear rates ensure you will get long service from these excellent servos and the ball raced output shaft ensures smooth operation and no binding … More..

  • Heat Shrink – 15 Meter assorted packHeat Shrink

      Highest quality thermally stabilized flame-retardant heat shrinkable Polyolefin Excellent  flame resistance, flexibility and insulation properties Shrinking Temperature: up to 125C Assortment package that includes five sizes: 6mm, 7mm, 8mm, 9mm, 10mm Package included: 3M x 6mm, 3M x 7mm, 3M x 8mm, 3M x 9mm, 3M x 10mm heat shrink   This item is Direct Delivery, Click for More information about Direct Delivery  

  • Model plane stand – Foam Interlocking

    Specifications: Length:   60cm Width:   30cm Height:   31cm Weight:    520g Material:   EVA Features: Suitable for all kinds of electric powered, gas powered airplanes and RC boats when working on or assembling the models Very convenient to assemble and disassemble it, easy transport Multi Fitment: large groove for larger gasoline airplanes, the other groove for small electric airplanes. Range of colours

  • Carbon U/C Slight Curve for Yak 54 and similar models 30, 50 & 70 size

    Carbon Fiber Landing Gear with gloss finsh for Electric RC Models and Similar types. Differing Sizes available – select below. 30 size: A=65mm/2.56in, B=260mm/10.24in, C=130mm/5.12in, D=20mm/0.79in; 50 size: A=70mm/2.73in, B=275mm/10.74in, C=150mm/5.85in, D=25mm/.98in 70 size: A=135mm/5.21in, B=320mm/12.6in, C=143mm/5.63in, D=25mm/0.98in; Measurements are approx due to manufacturing and curing. Package includes: 1 x CF landing gear.

  • Closed Loop Rudder mount Carbon fibre 20-30cc models

    This superb Carbon Fibre and alloy rudder servo closed loop mount removes the load form your servo of closed loop systems. The load goes through the ball raced carbon fibre intermediate arm, which is then connected via double control to your servo. This allows for quick and simple amplification of movement and a superb install. Suitable for 10cc to 30cc aircraft. Check out our multi servo mounts too. Overall Dimension: L121*38mm Carbon Fiber Servo Arm: L60*24mm; L112*33mm Aluminum Bearing Mount: D25*H18mm Bearing: D11mm Stainless Steel Push Pull Rod: L38mm Connecting Rod: L23mm

  • Skyartec Cessna 182 Blue or Red – RTF

    This is the 5 Channel Skyartec Cessna 182 from Skyartec. Equipped with 4 servos plus ESC for motor control this gives control of Ailerons, Rudder, Elevator and Flaps as well as motor control. The supplied Brushless motor and propellor combination give excellent power to weight ratio whilst still providing excellent control for slower flight. Everything the beginer needs to get flying the great value also suits experienced RC flyers. RC gear is standard style gear so not only can individual components be changed should it be necessary but it can also be used in other models.The airplane could be ready for flight within 20 minutes as much of the installation … More..

  • Adjustable Alloy / Steel Rudder Double horn.

    Specifically designed for larger surfaces, and models in the 50cc range this double rudder horn bolts through the rudder then clamps to it. Clever cupped seats take up the taper in the rudder to ensure a great look, and more important spread load. Ready fitted with threaded closed loop connectors this is what you need and have been looking for.  

  • DJI Phantom 3 Propeller Guards/ Protectors/ Bumpers/ Shielding Anti-Collision Rings 4pcs

      Set of four prop guards. protect your props, your motors and your quad as well as help protect anything you may bump into. Features: Easy to install and durable. To avoid bad landing such as scratching a car. Package Includes: 4 x DJI Phantom 3 Vision Propeller Protectors    Tips: When installing the propeller protector, you should use the original screws or M3*8 screws to avoid damaging the motor.

  • Fuel Plug / Bung Petrol Compatible

    Fuel plugs compatible with petrol fuel. Three standard holes, All are sealed but easily opened if needed. Central hole for clamp screw. Great for conversion using your existing pipework – don’t forget to add some Fuel Tube.

  • EME 35 35cc Petrol engine

    Fitting into the 30cc range and squaring up againsT the other engines in this range is the EME35. As usual with EME this is another workhorse of an engine, rear induction and side exhaust, this engine takes a range of silencers from the standard silencers, pitts or pipe / can mufflers. Specifications: Displacement: 35cc Weight: 960g/engine, 45g/muffler, 140g/ignition Carburetor: EME Compression Ratio: 7.6 Power: 3.6HP@7100RPM Idle RPM: 1550RPM Practical RPM: 1550~7500RPM Thrust 1: 9.0kgf (50~200M altitude) Thrust 2: 8.1kgf (1800~2000M altitude) Spark Plug: EME/ NGK CM6 Ignition Voltage: 4.8V~6.0V Fuel: 91~93 Octane, 1: 30~1: 35 mix ratio Recommended Propeller: 2 blades, 18*10, 19*10, 20*8(wooden prop, C.F. prop) Package Contents: EME … More..

  • Carbon U/C Slight Curve for Yak 54 and similar models 30, 50 & 70 size

    Carbon Fiber Landing Gear with gloss finsh for Electric RC Models and Similar types. Differing Sizes available – select below. 30 size: A=65mm/2.56in, B=260mm/10.24in, C=130mm/5.12in, D=20mm/0.79in; 50 size: A=70mm/2.73in, B=275mm/10.74in, C=150mm/5.85in, D=25mm/.98in 70 size: A=135mm/5.21in, B=320mm/12.6in, C=143mm/5.63in, D=25mm/0.98in; Measurements are approx due to manufacturing and curing. Package includes: 1 x CF landing gear.

  • Adjustable Anodised Alloy Elevator or Aileron Horn

    Alloy and Stainless Adjustable elevator and aileron horn. Clever self aligning load plates take the angle of the control surface into account automatically. Suitable for models up to 50cc 8ft / 3metres Pushrod Length: 115mm, Horn Screw Length: 50mm

  • 5m Covering Film Various colours

    Description: Item Name: Heat shrink film Length: 5m Width: 64cm Thickness: 0.05mm Color: Red Feature: ·Super strong with a tensile strength of around 25,000 psi (pounds per square inch) ·Lightweight about 100g/m² ·Dry adhesive is activated when heat Is applied ·Shrinks to a drum-tight finish as it cools ·Molds crease-free around compound curves and into corners ·High gloss finish, waterproof, fuel-proof (Glow Fuel, Gasoline, Smoke) ·Strong adhesion. How to Use: Please be sure to test a sample first as your iron heat settings may vary and practice on some scrap material first. Remove the protective backing film,put the film on top of framework to be covered,heating at the frame with … More..

  • Heat Shrink – 15 Meter assorted packHeat Shrink

      Highest quality thermally stabilized flame-retardant heat shrinkable Polyolefin Excellent  flame resistance, flexibility and insulation properties Shrinking Temperature: up to 125C Assortment package that includes five sizes: 6mm, 7mm, 8mm, 9mm, 10mm Package included: 3M x 6mm, 3M x 7mm, 3M x 8mm, 3M x 9mm, 3M x 10mm heat shrink   This item is Direct Delivery, Click for More information about Direct Delivery  

  • Big Stick 1060mm Wingspan Laser Cut Balsa Kit With Landing Gear And Wheels

      The Stick design seems like it has been around for as long as the hills but this new take on this classic is a bit special. all laser cut and ready for Electric or Glow (but electric is awesome), this semi advanced trainer / sports plane will has great handling for all experiences. Easy build from Laser Cut parts, and provided with accessories to suit this model builds quickly and results in a lovely finished model.   Description: Item Name: Stick Laser Cut Balsa Kit Wingspan: 1060mm Length: 780mm Kit Weight: 310g Package Weight: About 800g Product Size: 810x150x60mm Required Parts (Not Included): Radio: 4 Channel system Motor: 2826 … More..

  • ISDT SC608 150W 8A MINI Smart LCD Battery Balance Charger

    CHANGE STARTS HERE with the ISDT SC108 150w 8 amp Smart Charger Innovative scOs User interface features the simplest , simplest operation, hi-efficiency, compact, and it’s just the beginning… Specifications: Input Voltage:    DC 9~32V Output Voltage:    0~30V Charge Current:    0.1~8.0A Discharge Current:    0.1~3.0A Max Charge Capacity:    150W Max Discharge Capacity:    5W Balancing Current:    500mA/cell Balance Cells:    2-6S Supported Batt. Type: :    LiFe/Lilon/LiPo/LiHv (1∽6S) NiMH/Cd(1∽18S) Pb(1∽12S) Display:    2.4〃320×240 IPS LCD Operating Temperature:    0~40°C Storage Temperature:    -20~60°C Dimensions:    88x58x21 mm Weight:    110g 2.4″ IPS Display 262K colors Hi-brightness monitor, up to 178°visible angle, brings outstanding display overcomes other chargers scOs developed just for smart charging Colorful and bright UI design, optimized display information, … More..

  • CRRC 40i 40cc Kit engine

    This is the GF40i 40cc kit engine – finally something to build.   What you get in the box is a wonderful array of parts, all individually packaged to allow you to assemble your own engine with the included instructions. The build is not hard either, From opening the box it takes about 2 hours for a novice, and less than an hour for a pro, Ask nicely and we may even build it for you for a tenner. These engines build into a cracking 40cc motor which starts and runs with ease and simplicity. It is powerful too at 3.9hp all from a package not much bigger than the 26cc. As … More..

  • DJI Phantom 3 Propeller Guards/ Protectors/ Bumpers/ Shielding Anti-Collision Rings 4pcs

      Set of four prop guards. protect your props, your motors and your quad as well as help protect anything you may bump into. Features: Easy to install and durable. To avoid bad landing such as scratching a car. Package Includes: 4 x DJI Phantom 3 Vision Propeller Protectors    Tips: When installing the propeller protector, you should use the original screws or M3*8 screws to avoid damaging the motor.

 

Comments are closed.